Visual image of left wall lower portion
Case of persisting damp / seepage issues even after Refurbishing and Rectification work in a Duplex Home
Home » Case Studies » Case of persisting damp / seepage issues even after Refurbishing and Rectification work in a Duplex Home
- Case of persisting damp / seepage issues even after Refurbishing and Rectification work in a Duplex Home
- The Background
A duplex in a premier residential complex.
- Refurbishing / rectification jobs and re-painting done recently to repair damp walls / seepage problem.
- Source of Damp / Seepage not identified.
- Problem resurfaces
- This is where Team – MACJ – A Buyers Choice Home Inspections, came into picture.
The main concerned area was the Dining Hall.
It was badly affected. There were:
a) Paint discolouration on right wall lower portion around switch socket board.
b) Paint discolouration on right wall lower portion at mid span.
Observation 1 : Visual image of right wall around socket
Observation 1 : IR image showing moisture presence
mid span
Observation 2 : IR image showing moisture presence
- Adjacent Kitchen Wall
- The client informed our Team that there had been some past history of leakage around floor drain outlet and rectification works have been done for it. No active leakage was noted.
- Minor leak noted around junction of sink flexible drain pipe with outlet pipe on wall.
- Dripping water noted on wall surface under counter stone.
Observation 2 : Visual image of sink flexible pipe junction on wall
IR image showing moisture spreading from around outlet position
Our Team thoroughly inspected and found that there were multiple sources from the adjacent Kitchen Wall side.
As analysed by IR camera, moisture presence noted in the affected area due to intrusions from:
- Leak at junction of sink flexible drain pipe with outlet pipe on wall.
- From joints between wall tiles and counter stone.
- Also gap noted around sink tap.
- Multiple sources identified
Floor drain outlet condition
Leakage from sink flexible pipe at outlet joint
Deteriorated sealant at counter stone and wall tile junction
IR images confirmed water running along the surface of the wall which was spreading around the junction, thereby affecting the adjacent right wall of Dining area.
However, there was another source, which was more challenging.
- Kitchen Balcony
We observed popping of paint on left wall and back wall lower portion above skirting. As confirmed by IR camera, the area was affected due to leakage from elbow joints of AC drain pipe running concealed along the affected area and spreading to the dining area wall.
- December 8, 2018
- Kitchen Balcony
If only our client engaged us in the first place, then he / she would not have to shell down big amounts.
IR image showing moisture presence
Visual image of back wall corner with left wall
IR image showing moisture presence at lower portion
| Area of Work | Purpose | Repair / Renovation Work |
|---|---|---|
| Kitchen | To stop Leak at junction of sink flexible drain pipe with outlet pipe on wall. |
|
| Kitchen | Rectification at joints between wall tiles and counter stone and at Gap around sink tap. |
|
| Kitchen Balcony | To rectify AC drain pipe |
|
- Step 1 – Sealant around the junction to be scrapped off.
- Step 2 – Junction around outlet pipe on wall to be sanded off any loose materials and left for ventilation for entrapped moisture to dry out.
- Step 3 – Flexible drain pipe to be reinstalled with adequate slope of the end face inside the outlet on wall.
- Step 4 – Junction around the outlet pipe on wall to be sealed with polysulphide sealant.
- Step 1 – Existing sealant at counter and wall tile junctions and around sink tap to be scrapped off.
- Step 2 – Junctions between counter stone and wall surface and around sink tap to be cleaned of any loose materials.
- Step 3 – Adequate packing under sink tap to be done with polysulphide sealant.
- Step 4 – Junctions to be sealed with epoxy based stone grout of matching colour pigment.
- Step 1 – Sanding around the affected area till plaster surface and chase cutting to be done along the AC drain pipe at conceal around the affected Area.
- Step 2 – Drain pipe to be checked for any damage and leakage.
- Step 2.1 – If found damaged, then damaged pipe to be replaced with new agricultural pipe.
- Step 3 – Drain pipe to be reinstalled with proper solvent joints at elbow positions.
- Step 4 – Adequate ventilation to be provided around the affected area for the entrapped moisture to dry out.
- Step 5 – Smooth surface finish with mesh tape and repair mortar to be provided.
- Step 6 – Paint finish as per paint manufacturer specification.
This case study establishes that localised / surface rectifications are not enough to solve a damp / seepage problem. It is important to find the source of the problem. It requires state of the art tools and expert knowledge (of Professional Home Inspectors) to accurately identify the issue and the source of damp/ leakage/ seepage. Experts are needed not only for identification purposes but also to provide the best pocket friendly solutions for the issues. Trust our experts to give you a long term solutions to your problems.
If only our client engaged us in the first place, then he / she would not have to shell down big amounts.
- MACJ - A Buyer’s Choice Homes Inspections Motto:
- LLL – Long term solution – Low cost of Repair - Least destruction